# Errors encountered



# error 0x105(ESP_ERR_NOT_FOUND)

This error can mean either:

- The camera isn't seated properly
- The pin configuration is wrong
- You've selected the wrong board

```
E (893) camera: Camera probe failed with error 0x105(ESP_ERR_NOT_FOUND)<br></br>Camera init failed with error 0x105
```

In the case of the ESP32-S3-WROOM, selecting WROOM2 generates this error.

These settings work properly:

[![image.png](/uploads/images/gallery/2024-09/scaled-1680-/aJgimage.png)](/uploads/images/gallery/2024-09/aJgimage.png)

# designator order for field 'xxx' does not match declaration order in 'yyy'

This error occurs when the "order of declared members" is not in the right order.  
I don't know the rules of this language enough, but it would appear there is a fixed order when you do an inline declaration:

This is correct, for example:

```
camera_config_t config =  {
    .pin_pwdn = PWDN_GPIO_NUM,
    .pin_reset = RESET_GPIO_NUM,
    .pin_xclk = XCLK_GPIO_NUM,
....
```

While this one (reset and pwdn are reversed) generates the error:

```
camera_config_t config =  {
    .pin_reset = RESET_GPIO_NUM,
    .pin_pwdn = PWDN_GPIO_NUM,
    .pin_xclk = XCLK_GPIO_NUM,
    ....
    
```